4 tips on getting started with water skiing


Water skiing is great fun. But you need to know the right tricks to get the most out of it. Here are some tips for water skiing.

1. With less force you will get more direction

When you round a buoy, let your body’s natural falling motion roll the ski. The amount of edge formed here is the maximum angle you can take to the next buoy. When you free hand comes back onto the handle, you can feel your arms fall away from your body. This lets your body to freely extend away from the ski edge. It creates the maximum angle you can mange. Holding your biceps and elbows pulled tight reduces ski angle and reduces direction to the next buoy.

2. Set the angle of attack and forget about it

After rounding a buoy, set the angle of the ski before you get the pull of the boat. This makes you focus on acceleration. As the ski is at the proper position, you can now vary your acceleration. You can choose how long, how much or how fast you want to accelerate.


3. Find your rhythm

Many skiers fear that they might go too slow or too fast in the course. For example, if a skier goes too fast into a buoy, then they become scared to make a good turn as they won’t be able to manage the speed. In order to fix it, you should get them in rhythm. You should try to reach the apex of your turn to the buoy in order to get rid of fear of speed or width in the course.

4. Check your gear

Check the rope well before you hit the water. You should make sure that there is no weak spots in the line. You should have a good look at the handle as well. If you have used the rope many times, then it’s better to get a new rope.

These are very important tips which can make you experience more enjoyable and safe as well. Water skiing is fun, but dangerous as well. So, make sure you have everything in place before you hit the water.

3 great places to go river rafting


River rafting is great experience for those who love nature and adrenaline rushes. You get on your vests and helmets in order to paddle and bounce our way over turbulent water. River rafting is increasing in popularity. People look for good places to try it. Here are some great places to go river rafting.

1. Colorado River, Grand Canyon

The Colorado River winds for 226 miles through Colorado, Utah and Arizona. It is a great destination for rafting. While rafting, you will also be able to view the canyon. The journey provides lots of adventure on dry land with ancient Indian ruins, miles or hiking trails. You will find campsites located on beautiful beaches. So, you can take breaks in those campsites, relax and then move on.

2. Zambezi River, Zimbabwe


The Zambezi River at Victoria Falls provides an extreme adventure for experienced rafters. About half of the rapids along the river are graded as Class IV. Apart from the massive swells and dramatic drops, you will get the chance to see hippopotamuses and crocodiles up close. What can be more thrilling!

3. Futaleufu River, Chile


The Futaleufu River comes from glacier-fed lakes that are high in the Andes Mountains. The water is calm enough in many areas, ideal for novice rafters. There are also long stretches of rough rapids and Class IV drops along the way for experienced rafters. You will find permanent river caps with beds, warm showers, and hot tubs.
These places are just awesome for river rafting experiences. The locations are mostly ideal for experienced rafters. You will not only enjoy the adrenaline rush, but also the beautiful nature all around.

What is snow-mobile and how does it work?


Snowmobile is like motorcycle, except that you ride it on ice or snow. A snowmobile has a large wide track with deep rutted treads. A belt-drive and clutch system gives power from the engine to the track at the back. The concept of snowmobiles came from military technology. The rubber tracks used by the military worked well in snowy conditions. It has four major components: an engine, clutch, tracks, and skis. They also have seat and windshield similar to the motorcycles. The engines are similar to the engines used in personal watercraft. It sends power to the track drive. This rotates the tracks and makes the machine move. The faster the engine, the faster tracks rotate and the machine also goes faster.

The clutch system is pulley based. It has two pulleys connected by a drive belt. The primary clutch resides on the top of the engine. A pressure spring holds the primary clutch’s two halves apart when the engine’s rpm is low. When the engine accelerates, the clutch weights produce centrifugal force which closes the clutch and lets the bets move freely to give power.

The secondary clutch connected to the track drive turns the wheels to power the tracks. This clutch has a spring that operates the cams that are sensitive to torque. When the engine’s rpm increases, the primary clutch transmits power.The secondary clutch connected to the track drive turns the wheels to power the tracks. This clutch also has a spring that operates the cams that are sensitive to torque. When the engine’s rpm increases and the primary clutch transmits power, the cams squeeze and tighten the belt. This goes on during acceleration. When in top speed, the primary clutch closes and moves the belt into a higher gear. The secondary clutch opens as it needs less power to maintain speed than it did during acceleration.

The tracks are made of lightweight materials like rubber, but look similar to tank tracks. The tracks spread the weight out over a greater surface area. This allows movement in slippery, soft and unstable terrain. Sometimes the tracks come with sharp studs which give greater resistance. A snowmobile uses a handlebar for steering. The handlebars are joined to the skis mounted at the bottom of the snowmobile. Snowmobile shocks make the movement comfortable and let you be in better control.